The largest database of trusted experimental protocols

Criterion 4 to 12 bis tris gels

Manufactured by Bio-Rad
Sourced in Germany

Criterion 4% to 12% Bis-Tris gels are electrophoresis gels designed for the separation of proteins. They are pre-cast polyacrylamide gels with a linear gradient of 4% to 12% acrylamide concentration. The Bis-Tris buffer system is used, which provides optimal resolution and band sharpness for a wide range of protein molecular weights.

Automatically generated - may contain errors

5 protocols using criterion 4 to 12 bis tris gels

1

Colon Protein Extraction and Western Blot

Check if the same lab product or an alternative is used in the 5 most similar protocols
Total protein was isolated from approximately 50 mg of snap-frozen colon using Cell Extraction Buffer (Invitrogen, Grand Island, NY) containing Halt protease and phosphatase inhibitors (ThermoFisher Scientific, Waltham, MA) and Na3VO4 (Sigma, St. Louis, MO). Protein concentrations were determined using a DC protein assay (ThermoFisher). Samples were reduced by heating to 95°C for 5 minutes in the presence of 2-mercaptoethanol, subjected to SDS-PAGE (Criterion 4% to 12% Bis-Tris gels; Bio-Rad, Hercules, CA), and transferred to Nitrocellulose transfer membrane (Whatman GmbH, Dassel, Germany) by Criterion Blotter wet transfer (Bio-Rad). The membranes were blocked for 1 hour at room temperature in 5% milk in Tris-buffered saline with Tween-20 (TBST) and incubated overnight at 4°C with antisera to CRF1 (1:250; Millipore, Billerica, MA), CRF2 (1:1000; Millipore), and GAPDH (1:2000; Cell Signaling Technology, Danvers, MA) diluted in 5% milk in TBST. Membranes were then washed with TBST and incubated for 1 hour with anti-rabbit secondary antibody (1:2000; Cell Signaling, Danvers, MA). Densitometry was performed using Quantity One 4.6.9 software (Bio-Rad).
+ Open protocol
+ Expand
2

Protein Extraction and Western Blot Analysis

Check if the same lab product or an alternative is used in the 5 most similar protocols
Total protein was isolated from approximately 50 mg of snap-frozen vagina, bladder, and colon using Cell Extraction Buffer (Invitrogen, Grand Island, NY) containing Halt protease and phosphatase inhibitors (ThermoFisher Scientific, Waltham, MA) and Na3VO4 (Sigma, St. Louis, MO). Protein concentrations were determined using a DC protein assay (ThermoFisher). Samples were reduced by heating to 95°C for 5 minutes in the presence of 2-mercaptoethanol, subjected to SDS-PAGE (Criterion 4% to 12% Bis-Tris gels; Bio-Rad, Hercules, CA), and transferred to Nitrocellulose transfer membrane (Whatman GmbH, Dassel, Germany) by Criterion Blotter wet transfer (Bio- Rad). The membranes were blocked for 1 hour at room temperature in 5% milk in Tris-buffered saline with Tween-20 (TBST) and incubated overnight at 4°C with antisera to CRF1 (1:500; Millipore, Billerica, MA), CRF2 (1:800; Millipore), TRPV1 (1:1000; Alomone Labs, Jerusalem, Israel), or TRPA1 (1:1000; Aviva Systems Biology, San Diego, CA) and GAPDH (1:2000; Cell Signaling Technology, Danvers, MA) diluted in 5% milk in TBST. Membranes were then washed with TBST and incubated for 1 hour with antirabbit secondary antibody (1:10,000; Cell Signaling, Danvers, MA). Densitometry was performed using Quantity One 4.6.9 software (Bio-Rad).
+ Open protocol
+ Expand
3

Protein Extraction and Western Blot Analysis

Check if the same lab product or an alternative is used in the 5 most similar protocols
Total proteins were isolated from approximately 50 mg of snap-frozen DRG, vagina, and colon tissue samples using Cell Extraction Buffer (Invitrogen, Grand Island, NY) containing Halt protease and phosphatase inhibitors (ThermoFisher Scientific, Waltham, MA) and Na3VO4 (Sigma, St. Louis, MO). Protein concentrations were determined using a DC protein assay (ThermoFisher). Samples were reduced by heating to 95°C for 5 minutes in the presence of 2-mercaptoethanol, subjected to SDS-PAGE (Criterion 4% to 12% Bis-Tris gels; Bio-Rad, Hercules, CA), and transferred to Nitrocellulose transfer membrane (Whatman GmbH, Dassel, Germany) by Criterion Blotter wet transfer (Bio-Rad). The membranes were blocked for 1 hour at room temperature in 5% milk in Tris-buffered saline with Tween-20 (TBST) and incubated overnight at 4°C with antisera to CRF1 (1:500; Millipore, Billerica, MA), TRPV1 (1:1000; Alomone Labs, Jerusalem, Israel), or TRPA1 (1:1000; Aviva Systems Biology, San Diego, CA) and GAPDH (1:2000; Cell Signaling Technology, Danvers, MA) diluted in 5% milk in TBST. Membranes were then washed with TBST and incubated for 1 hour with anti-rabbit secondary antibody (1:10,000; Cell Signaling, Danvers, MA). Densitometry was performed using Quantity One 4.6.9 software (Bio-Rad).
+ Open protocol
+ Expand
4

Protein Expression Analysis in DRG, Vagina, and Colon

Check if the same lab product or an alternative is used in the 5 most similar protocols
Total proteins were isolated from approximately 50 mg of snap-frozen DRG, vagina, and colon tissue samples using cell extraction buffer (Invitrogen) containing Halt protease and phosphatase inhibitors (Thermo Fisher Scientific, Waltham, MA) and Na3VO4 (Sigma). Protein concentrations were determined using a DC protein assay (Thermo Fisher). Samples were reduced by heating to 95°C for 5 minutes in the presence of 2-mercaptoethanol, subjected to SDS-PAGE (Criterion 4% to 12% Bis-Tris gels; Bio-Rad, Hercules, CA), and transferred to a nitrocellulose transfer membrane (Whatman GmbH, Dassel, Germany) by Criterion Blotter wet transfer (Bio-Rad). The membranes were blocked for 1 hour at room temperature in 5% milk in Tris-buffered saline with Tween-20 (TBST) and incubated overnight at 4°C with antisera to CRF1 (1:500; Millipore, Billerica, MA), TRPV1 (1:1000; Alomone Labs, Jerusalem, Israel), or TRPA1 (1:1000; Aviva Systems Biology, San Diego, CA) and GAPDH (1:2000; Cell Signaling Technology, Danvers, MA) diluted in 5% milk in TBST. Membranes were then washed with TBST and incubated for 1 hour with anti-rabbit secondary antibody (1:10,000; Cell Signaling). Densitometry was performed using Quantity One 4.6.9 software (Bio-Rad).
+ Open protocol
+ Expand
5

Bladder Protein Extraction and Western Blot

Check if the same lab product or an alternative is used in the 5 most similar protocols
As previously described,7 (link) total protein was isolated from the bladder using Cell Extraction Buffer containing Halt protease and phosphatase inhibitors (ThermoFisher Scientific, Waltham, MA) and Na3VO4. A Dc protein assay (ThermoFisher Scientific) was used to determine protein concentration and samples were reduced, subjected to SDS-PAGE (Criterion 4% to 12% Bis-Tris gels; Bio-Rad), and transferred to Nitrocellulose membrane (Whatman GmbH, Dassel, Germany). Non-specific binding was blocked by incubation in 5% milk in Tris-buffered saline with Tween-20 (TBST) for 1 h. Membranes were then incubated overnight at 4°C with primary antisera to CRF1 (1:500; Millipore, Billerica, MA), CRF2 (1:800; Millipore), and GAPDH (1:1000; Cell Signaling Technology, Beverly, MA). Membranes were then washed with TBST and incubated with anti-rabbit secondary antibody (1:10 000; Cell Signaling Technology) for 1 h. Densitometry was performed using Quantity One 4.6.9 software (Bio-Rad).
+ Open protocol
+ Expand

About PubCompare

Our mission is to provide scientists with the largest repository of trustworthy protocols and intelligent analytical tools, thereby offering them extensive information to design robust protocols aimed at minimizing the risk of failures.

We believe that the most crucial aspect is to grant scientists access to a wide range of reliable sources and new useful tools that surpass human capabilities.

However, we trust in allowing scientists to determine how to construct their own protocols based on this information, as they are the experts in their field.

Ready to get started?

Sign up for free.
Registration takes 20 seconds.
Available from any computer
No download required

Sign up now

Revolutionizing how scientists
search and build protocols!